Start with the marks, a magnet and a scale, which cost little and can't harm anything. The ice test and a silver acid kit add more clues, but every home test has limits, so a buyer's electronic or XRF test is the final word.
Before you start
Sort your pieces into groups first: jewelry, flatware and serving pieces, coins, and bars or rounds. Each group has its own easiest test. Coins and bars are often the simplest, because their size and weight are published.
No home test proves a piece is solid silver. Each one rules things out or adds a clue. If several tests agree, you can be fairly confident. If you plan to sell, the buyer will usually test the piece again anyway.
If you only want to know whether a piece is fake, see fake 925 silver: how to spot stamped base metal. This page covers how to run each test and what it can tell you.
Test 1: Look for marks
Use a loupe or your phone’s zoom. Common silver marks include:
- 925, STERLING or STER: sterling silver, 92.5% silver.
- 800, 835 or 900: other silver standards, common on European and older pieces.
- 999 or FINE SILVER: almost pure silver, common on bars and rounds.
- Lion, anchor or other symbols: often hallmarks. See British hallmarks and Mexican silver stamps.
Marks like EP, EPNS, A1 or silver plate mean a thin silver coat over base metal. See silver plate marks. A mark is a claim, not proof, so keep testing.
Test 2: Try a magnet
Silver isn’t magnetic. Hold a strong magnet (a neodymium magnet works best) against the main body of the piece.
- It sticks firmly: the piece is mostly iron, steel or nickel, or it has steel parts. Clasp springs and knife blades are often steel even on real sterling, so test the main part.
- It doesn’t stick: a good sign, but not proof. Copper, brass, aluminum and nickel silver aren’t magnetic either.
With a bar or coin, you can tilt it and slide the magnet down the face. Real silver slows the magnet a little as it slides, because silver conducts electricity so well. This effect is subtle and works best on thick bars.
Test 3: The ice test
Britannica notes that silver has the highest thermal conductivity of all metals, which means it moves heat very quickly. That makes ice melt fast on it.
- Put the piece on a flat surface at room temperature.
- Set an ice cube on it, and another on a similar-sized piece of steel or glass.
- Watch which melts faster. On silver, the ice starts melting almost at once, as if the piece were warm.
The ice test works best on bars and large coins. It’s hard to read on thin chains and small rings. Copper also conducts heat well, so a fast melt rules out many fakes but not all of them.
Test 4: Weigh and measure coins and bars
For coins and bullion, the numbers are the best home test. Weigh the piece in grams on a scale that reads to 0.01 g, and measure its width with a ruler or calipers. Then compare with the published specs.
Each coin page in our coin list shows the weight and diameter. A counterfeit can be the right weight but the wrong size, or the right size but too light, because most base metals are less dense than silver. If both match, that’s a strong sign. Old, worn coins can be slightly light, so allow a little for wear.
For US coins, the date often tells you more than any test. See is my coin silver?
Test 5: A silver acid test kit
Silver acid kits use a testing solution that changes color when it touches silver. You put a drop on a small, hidden spot or on a streak rubbed onto a test stone, and compare the color with the kit’s chart.
- Follow the kit’s instructions. The solution is corrosive, so wear gloves and eye protection.
- A drop on the surface can leave a mark. Use a test stone if the kit has one, or test somewhere no one will see.
- The kit only reads the surface. Silver plate can pass the test, which is why buyers sometimes file a tiny notch first. Don’t file pieces you want to keep perfect.
See the tools page for what to look for in a loupe, magnet, scale and acid kit.
What each test tells you
| Test | Best for | Can it harm the piece? | Main limit |
|---|---|---|---|
| Marks | Jewelry, flatware, bars | No | Marks can be faked |
| Magnet | Everything | No | Many fakes aren’t magnetic |
| Ice | Bars, large coins | No | Copper can pass |
| Weight and size | Coins, bars | No | Needs published specs |
| Acid kit | Jewelry, flatware | Can leave a mark | Plating can pass |
Avoid tests you may see online that use bleach or heat. They can tarnish or damage a real piece and don’t tell you much more than the tests above.
Next steps
Once you think a piece is sterling or fine silver, weigh it and use the silver calculator to estimate its melt value. If a buyer tests it, ask what method they used and what it showed. Electronic testers and XRF machines read the metal without harming it, though they also mostly read the surface.
- Britannica: Silver (properties, conductivity and sterling)
- 16 CFR part 23: FTC Guides for the Jewelry, Precious Metals, and Pewter Industries (eCFR)
Last reviewed November 19, 2026. This guide is general information, not legal, tax or financial advice.