What happens to your gold after you sell it: refining explained

Where scrap gold goes after you sell it, how it is melted, tested and refined back to pure gold, and why that process shapes the offer you get.

Quick answer

Most scrap gold is melted, tested and sent to a refinery, which separates the pure gold from the other metals so it can be used again. Refining costs money and takes time, which is one reason buyers pay less than the full value of the gold in your items.

Your jewelry becomes scrap

When you sell a broken chain, an old ring or a single earring for its metal, the buyer usually isn’t planning to resell it as jewelry. It becomes scrap: gold that is worth only what can be recovered from it.

Scrap gold is almost never pure. A 14K ring is about 58% gold. The rest is silver, copper, zinc or nickel, mixed in to make the metal harder or change its color. A mix of metals like this is called an alloy. To be used again, for new jewelry, coins or bars, the gold has to be separated from everything else. That separation is called refining.

Knowing what happens next helps you understand why buyers offer what they do. It also tells you which questions are worth asking before you sell.

Step 1: sorting and testing

A buyer first sorts your items by karat and removes anything that isn’t gold, such as stones, steel clasps or watch movements. Each pile is weighed and tested, often with acid or an electronic tester. See how buyers test gold.

Small buyers usually don’t refine anything themselves. They collect scrap from many sellers until they have enough to send on, either to a larger dealer or straight to a refinery.

Step 2: melting and assaying

At the refinery, or at a larger dealer, the scrap is melted into a bar or into small grains. Melting mixes the metal so a small sample stands for the whole lot.

That sample is then assayed, which means tested to find out exactly how much gold it holds. The classic method is the fire assay. The sample is melted with chemicals, the other metals are burned off or dissolved, and what’s left is weighed. Britannica describes fire assay as the most reliable way to measure the gold, silver and platinum-group metals in a sample.

The assay result decides what the refinery pays the buyer. That’s why big buyers care so much about testing: if a lot turns out lower than expected, they lose money.

Step 3: refining to pure gold

Two classic refining methods date from the 1860s and 1870s, and versions of both are still in use.

Method How it works Purity it reaches
Miller process Chlorine gas is bubbled through the molten gold. Most other metals combine with the chlorine and float to the top, where they are skimmed off. About 99.5% (995 fine)
Wohlwill process The gold is dissolved and redeposited using electricity in an acid bath, leaving the other metals behind. About 99.99% (9999 fine)

The Miller process is fast and fairly cheap, but it can’t reach the highest purities and it doesn’t separate platinum. When a refinery needs very pure gold, such as the 9999 gold used for some bullion coins, it adds an electrolytic step like the Wohlwill process.

The other metals aren’t wasted. Silver, copper and platinum-group metals are recovered too, but your payout is usually based on the gold alone. If you have sterling or platinum, it’s usually valued separately. See the silver calculator.

Once refined, the gold is cast into bars or grain. These can then be made into new jewelry, coins, electronics or investment bars. For more on how purity numbers like 999 and 9999 are written, see gold fineness explained.

Why this affects your offer

Every step costs money: shipping, insurance, melting, assaying, refining and the time the gold spends in the pipeline. Refineries charge for their work, and some metal is lost in melting. The price of gold can also move while the metal is on its way.

Buyers cover these costs by paying less than the full metal value of your items. That gap is normal. It’s the reason the scrap price you’re offered is lower than the spot price you see quoted. See spot price vs scrap price.

The size of the gap varies a lot. A business that refines in large volume, or sells straight to a refinery, can often afford to pay more than one that passes your gold through several hands. Our gold calculator shows what your gold is worth at today’s price, and its presets show how much different kinds of buyer tend to pay.

What this means for you

  • Know your metal value first. Weigh your gold and find its karat, then use the calculator. See how to weigh gold at home.
  • Ask how your gold will be tested. A buyer who tests in front of you lets you see the result. With a mail-in buyer, ask whether they pay on an electronic test or an assay, and what happens if you turn down the offer.
  • Don’t melt it yourself first. Refiners and buyers melt gold every day. Melting at home usually doesn’t raise your offer and can make your gold harder to test. See should you melt your own gold before selling?
  • Compare offers. Because refining costs differ between buyers, so do their offers. See how to tell if an offer is fair.

Values on this site are estimates, not financial advice.

Sources

Last reviewed November 20, 2026. This guide is general information, not legal, tax or financial advice.

Was this guide helpful?

Keep reading

All guides →