Coins in jewelry: bezels, loops and holes

How buyers value a gold or silver coin set in a pendant, ring or bracelet, why damage matters, and whether to take the coin out before you sell.

Quick answer

A coin in jewelry is usually valued in two parts: the coin, by its metal content, and the frame (bezel) around it, by its own weight and karat. Holes, loops and solder normally remove any collector premium, so most coin jewelry sells close to melt value.

What coin jewelry is

Gold and silver coins have been worn as jewelry for a long time. You might find:

  • A coin held in a bezel, a metal frame that wraps around the edge of the coin, hung on a chain as a pendant.
  • A coin with a loop or ring soldered to its edge so it can hang without a frame.
  • A coin with a hole drilled through it.
  • Coins set into rings, cufflinks, money clips, belt buckles or charm bracelets.

These pieces can hold a lot of metal, so they’re worth valuing carefully. But they are valued differently from a loose coin.

Two parts, two values

A buyer will usually think about coin jewelry as two separate things.

The coin. If it’s a real gold or silver coin, its melt value comes from its pure metal content. Our coin pages list the weight, purity and pure metal content of common coins, such as the American Gold Eagle, Krugerrand and Mexican 50 Pesos.

The bezel and chain. The frame is valued like any other jewelry, by its weight and karat. Look for a stamp on the back or inside edge of the bezel, such as 14K or 585. See gold stamps explained. A bezel with no stamp, or a stamp like GF or RGP, may be gold-filled or plated and worth little for metal.

The bezel and the coin are often different purities. A 22K coin in a 14K frame is common. That’s why a buyer can’t fairly price the whole piece at one karat.

Why damage matters

Some coins are worth more than their metal to collectors because of their date, rarity or condition. Read melt value vs collector value for how that works.

Jewelry use usually removes that extra value. Collectors want coins in original condition, and wearing or mounting a coin often leaves marks:

  • Holes can’t be undone.
  • Solder from a loop leaves a mark on the edge, even after the loop is cut off.
  • Bezel marks are scratches or dents on the rim from the prongs or frame.
  • Wear from rubbing against skin and clothes flattens the design.

A damaged coin is usually valued for its metal. For a common bullion coin that changes little. For an older or scarcer coin, it can mean a big drop from what an undamaged one would bring.

Is it a real coin?

Coin jewelry is a popular place for copies. Replica coins, coins with a thin gold plating, and “tribute” pieces made to look like famous coins are sold as jewelry all the time. Signs to check:

  • The words COPY or a maker’s mark on the coin.
  • A weight or size that doesn’t match the coin’s listed specs.
  • Wear showing a different color metal underneath.

See how to spot fake gold coins for more checks. A good buyer will test the coin, not just the bezel.

Should you take the coin out?

You don’t have to. Most buyers will value the piece as it is. But separating the parts can help you check an offer:

  • Ask the buyer to weigh the parts separately or to tell you how much of the weight they’re treating as coin and how much as bezel.
  • If you want to remove the coin, ask a jeweler. Many bezels open with a small screw or a tab, but some are soldered shut. Prying with a knife can scratch the coin and bend the frame.
  • Leave a holed or soldered coin as it is. Removing a loop won’t restore collector value.

If the coin looks old or unusual and has no damage, have it looked at by a coin dealer before you sell it for melt.

Working out a rough value

  1. Identify the coin and look up its pure metal content on our coin pages.
  2. Check the bezel and chain for a karat or silver stamp.
  3. Estimate the bezel’s weight. If you can’t separate the parts, subtract the coin’s listed weight from the total weight on a kitchen or jewelry scale.
  4. Use the calculator to value the bezel and chain at their karat.
  5. Add the two together for a rough melt value.

Treat the result as a starting point, not a quote. Buyers vary in how they handle mixed pieces, so it’s worth getting more than one offer.

Last reviewed November 12, 2026. This guide is general information, not legal, tax or financial advice.

Was this guide helpful?

Keep reading

All guides →