Coin grading and slabs: what the numbers mean

What coin grades like G-4, VF-20 and MS-65 mean, what a slabbed coin is, and when grading matters if you are selling.

Quick answer

Coins are graded on a 1 to 70 scale, where low numbers mean heavy wear and 60 and up means no wear at all. Grade matters a lot for scarce coins and very little for common coins that sell for their metal.

What a coin grade is

A coin’s grade describes its condition: how much wear it has, and for unworn coins, how many marks and how good the strike looks. Two coins with the same date and mint mark can be worth very different amounts depending on grade.

Most US graders use the Sheldon scale, which runs from 1 to 70. PCGS, one of the large grading companies, explains that it was developed by Dr. William Sheldon. NGC, another large grader, calls it “the internationally accepted Sheldon grading scale of 1 to 70.”

Each grade has a short letter code and a number, such as F-12 or MS-65.

The main grades

These short descriptions are quoted or adapted from PCGS’s grade definitions.

Grade Name What it looks like
PO-1 Poor Barely identifiable as to type, date and mint mark
FR-2 Fair Worn flat, with only traces of lettering at the edge
AG-3 About Good Rims worn into the tops of the letters
G-4 Good Rims mostly full; design mostly worn flat
VG-8 Very Good Most central detail worn flat; rims full
F-12 Fine About half of the detail worn flat; all lettering visible
VF-20 and up Very Fine Moderate wear with some loss of detail
XF-40 (also written EF-40) and up Extremely Fine All design shows, but high points worn flat
AU-50 to AU-58 About Uncirculated Only a trace of wear on the highest points
MS-60 to MS-70 Mint State No wear; higher numbers mean fewer marks and better looks

Note that “Good” sounds positive but means a heavily worn coin. That surprises many first-time sellers.

MS stands for Mint State, used for coins made for circulation that show no wear. PR or PF means Proof, a coin specially struck for collectors with a mirror-like finish. “Proof” describes how a coin was made, not its condition, so a proof coin also gets a number, such as PR-69.

What a “slab” is

A slab is the sealed, hard plastic holder that a grading company puts a coin in after grading it. The label inside usually shows:

  • The coin’s date, mint mark and denomination
  • The grade
  • A certification number, unique to that coin

Both PCGS and NGC let you look up a certification number on their websites or apps. The record should match the coin, the date and the grade on the label. This is a good first step if someone shows you a slabbed coin, or if you inherited one.

A lookup isn’t a full guarantee. PCGS warns that counterfeiters may copy its labels “using actual certification numbers derived from public sources,” and NGC has reported fake holders with real certification numbers. If a slabbed coin seems too good to be true, have a coin dealer or the grading company look at it. See how to spot fake gold coins.

“Details” grades: cleaned or damaged coins

Some coins can’t get a normal number grade because of a problem. NGC calls these Details grades: the label gives a general wear level, such as “XF Details,” and names the problem, such as IMPROPERLY CLEANED, SCRATCHES, BENT or REMOVED FROM JEWELRY.

A Details coin usually sells for less than a problem-free coin with the same wear. This is one reason you shouldn’t clean coins before selling them. See should you clean coins before selling?

Does grading matter for your coins?

It depends on what drives the coin’s value.

  • Common coins worth about their metal. Worn 90% silver dimes and quarters, and most modern bullion coins, usually sell close to melt value whatever the grade. See 90% silver “junk silver” explained.
  • Scarce dates and older coins. For a key date or an older coin in high grade, the difference between grades can be large. A price guide will show it.
  • Pre-1933 US gold and old silver dollars. These often sell above melt, and grade is a big part of the price.

Use our coin melt values page to see what a coin’s metal is worth, and the What’s my coin worth? finder for rough collector values of worn coins. If the collector value is well above melt, grade is worth paying attention to.

Should you get coins graded?

Grading costs money. PCGS requires a paid membership or submission through one of its authorized dealers. NGC accepts direct submissions from paid collector members, or through a dealer. Fees depend on the coin’s value and how fast you want it back, and shipping adds to the cost.

For most inherited coins, grading isn’t worth the cost. It can make sense for a coin that might be worth much more than its metal. A coin dealer can usually tell you whether that’s likely before you pay anything.

You don’t need a slab to sell a coin. Dealers grade raw (unslabbed) coins by eye every day, though their opinion may differ from yours. See melt value vs collector value for how to tell when a coin deserves a closer look.

Values are estimates, not offers and not financial advice.

Sources

Last reviewed November 11, 2026. This guide is general information, not legal, tax or financial advice.

Was this guide helpful?

Keep reading

All guides →